- Reviews (0)
Beginners Moulding and Casting Kit
Our Beginners Moulding and Casting Kit is the ideal way to start moulding & casting! Get ready to experiment with easy to use silicone and polyurethane resin!
- 1 x 500g Pinkysil silicone
- 1 x 500g Procast resin
- 2 x Plain Plastic Cups
- 1 x 500g Modelling Clay
- 4 x 60ml Measuring Cups
- 5 x Small Mixing Sticks
- 1 x Pair Latex Gloves
Pinkysil is a two component, addition curing, low viscosity silicone designed for taking very fast impressions. It is ideally suited to and is the product of choice for fast set moulds where a free flowing product is required and when time factors are an issue. Pinkysil is a fast set, skin-safe silicone with a 4-6 minute pot life and a de-mould time of 30+ minutes.
Procast® is a two component rigid urethane casting compound. It cures to approximately Shore 65D and is tan in colour. Procast® is rapid setting and demonstrates more flexibility than other similar materials. Procast® is compatible with a wide range of fillers and can reproduce intricate detail as a result of its low viscocity. The system is easy to use with a 1:1 mix ratio and has a low setting exotherm temperature of only 77°C. Procast® can be demoulded in 1-3 hours dependent on cast thickness.
Once you have experimented with our beginners moulding and casting kit and wish to create more reproductions, we suggest the use of a suitable release agent for faster, easier moulding and casting.
|Pinkysil_Part B_SDS||application/pdf||208 KB|
|Pinkysil_Part A_SDS||application/pdf||208 KB|
|Modelling Clay - SDS||application/pdf||185 KB|
|Easycast TDS||application/pdf||116 KB|
|Easycast Part A SDS||application/pdf||289 KB|
|Easycast Part B SDS||application/pdf||207 KB|
Only logged in customers who have purchased this product may leave a review.