Clear Coating Epoxy Resin Large Kit
$108.85 – $1,114.50 Online Discount
In-Store/Phone Orders (per unit/metre): $114.30 - 2ltr , $220.50 - 5ltr , $368.05 - 10ltr , $660.70 - 20ltr , $1136.80 - 40ltr
All epoxy resins are used at customers own risk, due to the large amount of variables when mixing and casting resin, ie. ambient temperature, volume of cast, additives. Reading the technical data sheet, testing and thorough research is highly recommended before attempting large pours.
- Reviews (22)
Clear Coating Epoxy Resin is a water clear, UV stable, low viscosity resin. It is a solvent free epoxy specifically formulated as a clear, ultra-high gloss coating system that will self-level and cure at room temperature. It has excellent air-release and has been optimised for extended UV stability.
Applications: This low odour Epoxy Resin is ideal for coating, doming and resin art applications. Clear Coating Epoxy Resin is not suitable for embedding, casting or coating more than 2mm thick. We recommend our Bio Casting Epoxy Resin for these applications.
Coverage: 1 litre = 0.6 square metres, approximately subject to the substrate it is being poured onto.
To find out how much Clear Coating Epoxy Resin you will need for your project Click Here
- 92 parts hardener to 100 parts resin by weight
- 1 part hardener to 1 part resin by volume
Note: Care should be taken when dispensing and mixing. Do not attempt to control the cure time by altering the hardener ratio. Please note that the room temperature will affect cure characteristics. Measure and mix Clear Coating Epoxy Resin with hardener using our range of Measuring and Mixing Equipment.
- Pot Life – 100g @ 25ºC (in air): 38 minutes
- Thin Film Tack Free Time @ 25ºC: 7 hours
- Thin Film Open Time @ 25ºC: 40 – 60 minutes
- Cured to Solid State @ 25ºC: 24 hours
- Shore ‘D’ Hardness 24h@ambient +16h@40ºC: 76
- Easy clean up with Isopropyl Alcohol or Acetone.
- Use Opaque, Translucent, Mica Powder or Pearlex pigments to colour resin
When purchasing 20L & 40L sizes we recommend adding a Bung Tap to your order to make pouring easier.
Ensure surfaces are dry and free from contaminants. Use two clean plastic containers of equal volume to measure the correct proportion of resin and hardener. Pour the contents of both into a larger container and stir the two ingredients thoroughly, for at least 3 minutes –longer in cooler temperatures. Tip the mixed resin and hardener into a second large container and thoroughly mix again for a further 1-2 minutes. Take care to stir the material slowly so air entrapment is kept to a minimum.
Clear Coating Epoxy Resin may be directly poured or brushed onto a surface and will self level to produce a very high gloss. For best results apply at temperatures between 15ºC and 35ºC, and at below 85 percent humidity.
Air bubble release is greatly enhanced by the use of a small heat gun or mini gas torch. Hold the torch approximately 100 to 150mm off the surface and keep moving the flame across the surface. Heat can be applied as many times as needed in the 30 minute working time. Inspect and remove any lint with tweezers. Clear Coating Epoxy Resin Epoxy should be cured in a warm 25°C, dust free area.
Clear Coating Epoxy Resin is not to be thinned under any circumstances, as it has been formulated to optimal viscosity for this specific application.
|Clear Coating Epoxy Resin - SDS||application/pdf||305 KB|
|Clear Coating Fast Hardener - SDS||application/pdf||293 KB|
|Clear Coating Epoxy Resin Kit - TDS||application/pdf||95 KB|
Only logged in customers who have purchased this product may leave a review.